SAFETY DATA SHEET (GHS COMPLIANT)

Safety Data Sheet

ZEELCHEM® Silicone Defoamer CAS: 63148-62-9
Shop Online Buy on Amazon

MATERIAL SAFETY DATA SHEET (16 SECTIONS)

Document Ref: ZEEL/MSDS/ZEELCHEM®601 • Rev Date: 2024-01-15

SECTION 1: Chemical Product & Company Identification

Product Name:Silicone Defoamer Emulsion
Trade Name / Grade:ZEELCHEM® 601
CAS Registry Number:63148-62-9
EC / EINECS Number:Polymer Exempt
Chemical Formula:(C2H6OSi)n (Polydimethylsiloxane Emulsion)
Recommended Use:Industrial Water Treatment, Scale & Corrosion Inhibitor, Dispersant, Biocide.
Manufacturer Name:ZEEL PRODUCT
Office & Plant Address:A-23, Reva Duplex, Ankhol, Waghodia Road, Vadodara - 390019, Gujarat, India.
Emergency Contact:+91-9724593964 / +91-9723859512 (24 Hours Hotline)

SECTION 2: Hazard(s) Identification

GHS Classification: Non-hazardous under GHS criteria (Mild eye irritant)

Signal Word: NOTICE

Hazard Statements: H320: May cause mild temporary eye irritation.

Precautionary Statements: P264: Wash hands thoroughly after handling. P305+P351+P338: IF IN EYES: Rinse with water for several minutes.

SECTION 3: Composition / Information on Ingredients

Chemical IngredientCAS NumberPurity / Concentration
Silicone Defoamer Emulsion63148-62-9Commercial Technical Grade Solution
Water / Aqueous Carrier7732-18-5Balance

SECTION 4: First-Aid Measures

  • Eye Contact: Immediately flush eyes with plenty of clean water for at least 15 minutes, lifting upper and lower eyelids. Remove contact lenses if present. Seek immediate medical attention.
  • Skin Contact: Immediately remove contaminated clothing. Wash affected skin thoroughly with soap and water for at least 15 minutes. Get medical assistance if irritation persists.
  • Inhalation: Move exposed person to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, administer oxygen by trained personnel. Seek medical help.
  • Ingestion: Rinse mouth with water. Do NOT induce vomiting unless directed by medical personnel. Never give anything by mouth to an unconscious person. Seek urgent medical advice.

SECTION 5: Fire-Fighting Measures

Suitable Extinguishing Media: Water spray, alcohol-resistant foam, dry chemical powder, carbon dioxide (CO2).

Specific Hazards Arising from Chemical: In case of fire, hazardous decomposition products may be formed: Silicon dioxide, carbon dioxide, formaldehyde traces above 150°C.

Protective Equipment for Firefighters: Wear self-contained breathing apparatus (SCBA) with full protective facepiece and chemical protective suit.

SECTION 6: Accidental Release Measures

Personal Precautions: Use personal protective equipment (goggles, gloves, respirator, safety shoes). Avoid breathing vapors or mists. Ensure adequate ventilation.

Environmental Precautions: Prevent material from entering drains, sewers, surface water, or groundwater systems.

Clean-Up Methods: Neutralize carefully if acidic/alkaline. Soak up with inert absorbent material (sand, silica gel, acid binder). Transfer into clean, suitable containers for disposal.

SECTION 7: Handling and Storage

Safe Handling Precautions: Avoid contact with eyes, skin, and clothing. Avoid inhalation of vapor or mist. Use only under adequate ventilation. Wash thoroughly after handling.

Storage Conditions: Store in original, tightly closed HDPE drums or IBC totes. Keep in a cool, dry, well-ventilated location away from direct sunlight, heat sources, and incompatible substances.

SECTION 8: Exposure Controls / Personal Protection

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits.

Personal Protective Equipment (PPE):

  • Eye/Face Protection: Tightly fitting safety goggles and full face shield.
  • Skin/Body Protection: Chemical-resistant Neoprene or Nitrile gloves, safety apron, and rubber boots.
  • Respiratory Protection: NIOSH-approved organic vapor / acid gas respirator if aerosol or mists are generated.

SECTION 9: Physical & Chemical Properties

Physical State & Appearance:Milky white emulsion liquid
Odor:Mild odorless to light organic
pH:6.0 - 8.0
Specific Gravity (20°C):0.98 - 1.02 g/cm³
Solubility in Water:Dispersible in water
Boiling Point:100°C (Water phase)
Flash Point:> 100°C

SECTION 10: Stability and Reactivity

Chemical Stability: Stable under recommended storage conditions.

Possibility of Hazardous Reactions: Exothermic reaction when exposed to strong bases, strong oxidizing agents, or reactive metals.

Conditions to Avoid: Direct sunlight, freezing, excessive heat, contact with incompatible materials.

Incompatible Materials: Strong oxidizing agents, strong bases, active metals (aluminum, zinc, steel).

Hazardous Decomposition Products: Silicon dioxide, carbon dioxide, formaldehyde traces above 150°C.

SECTION 11: Toxicological Information

Acute Toxicity: Oral LD50 (Rat): > 2,000 mg/kg; Dermal LD50 (Rabbit): > 2,000 mg/kg.

Skin Contact: Severe irritation or chemical burns depending on exposure length.

Eye Contact: Risk of serious eye damage, permanent corneal opacity if untreated.

Carcinogenicity: Not listed as carcinogen by IARC, NTP, OSHA, or ACGIH.

SECTION 12: Ecological Information

Ecotoxicity: Toxic to aquatic organisms at high concentration. LC50 (Fish, 96h): > 100 mg/L.

Persistence & Degradability: Biodegradable over time under industrial wastewater treatment conditions.

Bioaccumulative Potential: Low potential for bioaccumulation due to high water solubility.

SECTION 13: Disposal Considerations

Waste Treatment: Dispose of in accordance with local, state, and national environmental regulations. Do not discharge into sewer or waterways without neutralization.

Packaging Disposal: Triple rinse empty containers with water. Offer clean drums for recycling or reconditioning.

SECTION 14: Transport Information

Transport Classification: Non-Regulated (Not Classified as Dangerous Goods)

Special Transport Precautions: Ensure containers are securely fastened and protected against physical damage during transit.

SECTION 15: Regulatory Information

International Chemical Inventory Status: Listed on TSCA (USA), EINECS/REACH (Europe), DSL (Canada), AICS (Australia), ENCS (Japan), IECSC (China).

Factory Certifications: Manufactured in an ISO 9001:2015 & ISO 14001:2015 certified production plant by ZEEL PRODUCT, Vadodara, Gujarat, India.

SECTION 16: Other Information

NFPA 704 Rating: Health: 0, Flammability: 0, Instability: 0, Special: None

Disclaimer: The information provided in this Safety Data Sheet is correct to the best of our knowledge, information, and belief at the date of its publication. ZEEL PRODUCT makes no warranty, expressed or implied, regarding its accuracy.

Technical Support Hotline: +91-9724593964 | Email: [email protected] | Web: www.zeelproduct.net